onlinechem.pl marine
Technical guide

AUS 40 density, volume and storage — with a litres/kilograms converter

1000 litres of AUS 40 is not one tonne. Here is the conversion, the storage temperature question, and a calculator so you stop ordering the wrong quantity.

Updated: 18 November 2026

1000 litres of AUS 40 is not one tonne. Commercial specifications give a density of 1105–1177 kg/m³ at 20 °C, so a full 1000-litre IBC holds roughly 1105–1177 kg. Order in the unit your supplier quotes in, and reconcile both on the delivery note.

Converter: litres, kilograms and IBCs

Set the density from your certificate of analysis if you have it. The defaults are the midpoint of the published range for AUS 40 and a typical value for 50% caustic soda.

1000 l ≈ 1140 kg ·

Why the unit matters commercially

Two things go wrong when litres and kilograms get treated as interchangeable. The first is the order itself: asking for "a tonne" and receiving 1000 litres means receiving 10 to 18 per cent more product than the budget assumed. The second is the comparison: a price per litre and a price per kilogram are not comparable figures, and in a three-way quote that difference is larger than the margin anyone is arguing about.

It also explains something that confuses people on our own product card for caustic soda. The selector says IBC 1200 kg while the description says 1000 l. Both are right. At a density of about 1.52 kg/l, 1200 kg of 50% caustic soda occupies roughly 790 litres, so a 1000-litre IBC is filled to about four fifths — which is also why the IBC is rated for densities up to 1.9 g/cm³.

Storage temperature: the question behind the question

People searching for the freezing point of a 40% urea solution are usually not doing chemistry. They are deciding where to put a container, or working out whether what arrived is still usable. So here is the practical version.

AUS 40

A 40% solution crystallises at a higher temperature than AUS 32, which is commonly cited at about −11 °C, simply because it carries more urea in the same volume. That is the whole reason marine reagent tanks are heated and insulated while road vehicles manage without.

We do not publish a single crystallisation figure for AUS 40 that we have not verified against a batch certificate, and you should be sceptical of pages that do. ISO 18611-3 is the part of the standard that covers handling, transport and storage; the batch CoA is where the number for your delivery comes from. Ask us and we will give you the one that applies.

Caustic soda 50%

Here the picture is well documented and the numbers agree. A 50% sodium hydroxide solution starts to crystallise at around 12 °C — supplier datasheets give 10–12 °C, 12.1 °C and about 13 °C — and safety data sheets call for storage above 15 °C.

Where the container sitsWhat that means in a Baltic winter
Engine room or heated tank 50% is fine, and it is the smallest volume for the same sodium hydroxide content
Deck or quayside, unheated 50% will crystallise. A 30% solution stays liquid far colder — the minimum freezing point across the dilution curve is about −27 °C at 18% NaOH

Two cautions before anyone switches concentration. A 30% solution contains less sodium hydroxide in the same volume, so the duty has to be recalculated — you will need more of it. And your scrubber manufacturer may specify a concentration; 50% is the figure that appears in exhaust gas cleaning documentation. Check the system documentation before changing what you buy.

If it has already crystallised

Crystallised caustic soda is a handling problem, not a waste problem — a 50% solution stored correctly has a practically unlimited shelf life. It can also supercool well below its crystallisation point and then crystallise suddenly as the dihydrate. Warm it gently and uniformly according to the safety data sheet; do not apply direct heat to one spot, and do not pressurise a partially solid container.

Questions we get asked

How many kilograms is 1000 litres of AUS 40?

Roughly 1105 to 1177 kg at 20 °C, depending on the batch. Commercial AUS 40 specifications give a density of 1105–1177 kg/m³, so an IBC filled to 1000 litres is noticeably more than one tonne. Litres and kilograms are not interchangeable on a delivery note.

What is the density of a 40% urea solution?

Commercial specifications for AUS 40 report 1105–1177 kg/m³ at 20 °C, alongside a refractive index of about 1.3947–1.3982. Density is one of the parameters a batch certificate of analysis reports, so use the figure from your CoA rather than a generic value.

At what temperature does AUS 40 freeze?

Higher than AUS 32, which is commonly cited at about −11 °C, because a 40% solution carries more urea in the same volume. We do not publish a single figure we have not verified against a batch certificate — ask for the crystallisation temperature on the CoA for the batch you are buying. In practice marine reagent tanks are heated and insulated for exactly this reason.

And caustic soda 50% — when does that crystallise?

Around 12 °C. Supplier datasheets give 10–12 °C, 12.1 °C and about 13 °C, and safety data sheets call for storage above 15 °C. That is why an IBC of 50% caustic standing on deck through a Baltic winter is a predictable problem, and why a 30% solution is the answer for unheated storage.

Sources

  • Commercial AUS 40 specifications — density 1105–1177 kg/m³ at 20 °C, refractive index 1.3947–1.3982, urea 39.5–40.5% m/m.
  • ISO 18611-3 — handling, transportation and storage of AUS 40.
  • Westlake Vinnolit, caustic soda solution datasheet — a 50% solution starts to freeze at 10–12 °C; practically unlimited shelf life when stored as recommended.
  • ChemPoint specification — freezing point 12.1 °C.
  • TCI / Novi, Sodium Hydroxide Release Fact Sheet — about 13 °C; minimum freezing point about −27 °C at 18% NaOH.
  • Safety data sheets for NaOH 50% — storage above 15 °C.
  • onlinechem.pl product card for sodium hydroxide solution — IBC specification, rated for densities up to 1.9 g/cm³.

Need the product, not just the answer?

From one IBC to a road tanker, delivered to your vessel in Polish ports, with the certificate of analysis for your batch.

  • Urea solution 40% (AUS 40)
  • Caustic soda 50% (NaOH)

Related guides

Call us Request delivery slot