onlinechem.pl marine
Technical guide

ISO 18611-1 and the certificate of analysis: what gets certified

What the standard covers, which parameters decide whether a reagent is safe for your catalyst, and why the CoA belongs in your compliance file.

Updated: 18 November 2026

ISO 18611 is the standard series for AUS 40, the 40% aqueous urea solution used in marine SCR. Part 1 sets quality requirements, part 2 the test methods, part 3 handling, transportation and storage. ISO 18611-1:2014 was reviewed and confirmed in 2020. The road-vehicle equivalent, for AUS 32 or AdBlue, is ISO 22241.

About the PDF everyone is looking for

A large share of the searches that land on this page are after the standard itself as a PDF. Worth being straight about it: ISO 18611 is a purchasable standard, available from ISO and from authorised national standards bodies. No supplier can legitimately hand you the text, and anyone offering a free copy is not someone you want in your supply chain.

What a supplier can and should give you is the thing the standard actually exists to enable: a certificate of analysis for your batch, showing measured values against the requirements. That document is what passes an audit. The standard itself is what the laboratory measures against.

What the certificate of analysis reports

These are the parameters that decide whether a reagent is safe for your catalyst and your dosing system:

ParameterWhy it is on the certificate
Urea contentSets the dosing. Commercial AUS 40 specifications report 39.5–40.5% m/m
BiuretA urea decomposition product. Forms deposits; commercial specifications cap it at 0.5% m/m
AldehydesContamination indicator; commercial specifications cap it at 20 mg/kg
InsolublesParticulates that block injectors and strainers
Alkalinity as ammoniaIndicates hydrolysis of the urea in storage
PhosphateCatalyst poison
Metals (Ca, Fe, Cu, Zn, Cr, Ni, Al, Mg, Na, K)Cumulative catalyst poisons — the expensive, slow failure mode
Density at 20 °CLets you reconcile litres against kilograms on the delivery note
Refractive index at 20 °CQuick field check of concentration

Why this is compliance evidence, not a courtesy attachment

A TNO review notes that monitoring for Tier III purposes can be limited to continuous urea consumption and quality, in relation to fuel consumption and engine load. Read that carefully: quality is one of the monitored quantities. If your consumption record is in the compliance file, the document that evidences quality belongs next to it.

The same review reports that NOx emissions from Tier III ships are higher than the legislation intended and that owners report a substantial number of technical problems with SCR systems. Not all of those are reagent-related — but reagent quality is the one input you can document before it enters the tank.

How to read a certificate in thirty seconds

  1. Batch number present and matching the delivery note. No batch number means it is a specification sheet, not a certificate.
  2. ISO 18611-1 referenced, not ISO 22241. The second one is AdBlue.
  3. Measured values, not just limits. A column of "max" figures with no results column tells you nothing.
  4. Date of analysis and, ideally, the crystallisation temperature for that batch.
  5. Density at 20 °C, so the quantity on the note reconciles.

Red flags

  • A certificate that references ISO 22241 for a product sold as AUS 40.
  • A "certificate" with no batch identification.
  • Urea content quoted as exactly 40.0% on every batch — real analyses vary within the range.
  • A supplier who will only send the document after the order is placed.

Questions we get asked

What does ISO 18611 cover?

It is a three-part series for AUS 40, the aqueous urea solution used in marine SCR. Part 1 sets the quality requirements, part 2 the test methods, and part 3 handling, transportation and storage. ISO 18611-1:2014 was reviewed and confirmed in 2020, so that edition is current.

Where can I download ISO 18611-1 as a PDF?

From ISO or an authorised national standards body. It is a purchasable standard, not a free download, and no supplier can legitimately distribute the text. What a supplier can and should give you is a certificate of analysis showing your batch measured against it.

What is the difference between a specification sheet and a certificate of analysis?

A specification sheet states what the product should be. A certificate of analysis states what one specific batch measured. For compliance evidence you need the second one, with the batch identified.

Why does reagent quality matter for Tier III compliance and not just for the catalyst?

A TNO review notes that monitoring can be limited to continuous urea consumption and quality in relation to fuel consumption and engine load. If consumption and quality are the monitored quantities, the document that evidences quality belongs in the compliance file alongside the consumption record.

Sources

  • ISO 18611-1:2014 — quality requirements for AUS 40; reviewed and confirmed 2020.
  • ISO 18611-2 — test methods. ISO 18611-3 — handling, transportation and storage.
  • ISO 22241 — the corresponding standard for AUS 32 (AdBlue).
  • TNO (2023) — monitoring may be limited to continuous urea consumption and quality against fuel consumption and engine load; Tier III NOx emissions higher than intended; substantial technical issues reported by owners.
  • Commercial AUS 40 specifications — urea 39.5–40.5% m/m, biuret max 0.5% m/m, aldehydes max 20 mg/kg, density 1105–1177 kg/m³, refractive index 1.3947–1.3982 at 20 °C.

Need the product, not just the answer?

From one IBC to a road tanker, delivered to your vessel in Polish ports, with the certificate of analysis for your batch.

  • Urea solution 40% (AUS 40)
  • Caustic soda 50% (NaOH)

Related guides

Call us Request delivery slot