onlinechem.pl marine
Technical guide

Safety data sheets and specifications for marine urea and caustic soda

Which document says what, which one an audit actually asks for, and where to download ours.

Updated: 18 November 2026

Three different documents, three different jobs. The safety data sheet covers hazards and handling. The specification says what the product should be. The certificate of analysis says what your batch actually measured. Vendor approval usually asks for the first two; Tier III compliance evidence needs the third.

Download: caustic soda 50% and 30%

These are the current files from our shop, so they do not go stale behind a copy on a landing page. For the urea solution 40% (AUS 40), documentation is issued with the first delivery and available on request beforehand — ask us and we will send the specification and a specimen certificate of analysis.

What the safety data sheet tells you about caustic soda

Sodium hydroxide solution is not a benign product and the sheet says so plainly:

CAS / EC1310-73-2 / 215-185-5
TransportUN1824, ADR class 8 (corrosive)
Hazard statementsH290 — may be corrosive to metals; H314 — causes severe skin burns and eye damage
Pictogram and signal wordGHS05, "Danger"
Storageabove 15 °C — a 50% solution starts to crystallise around 12 °C
Environmentraises pH in surface and ground water, harmful to aquatic life, not biodegradable

We do not soften any of that in our copy, and you should be wary of a supplier who does. The product is safe to handle with the right equipment and procedure, which is exactly what the sheet is for.

What a certificate of analysis has to contain

For AUS 40 the reference is ISO 18611-1, and the certificate reports urea content, biuret, aldehydes, insolubles, alkalinity, phosphate, metals, density and refractive index. A document that references ISO 22241 instead is for AdBlue, not marine reagent.

The quickest test of whether you are holding a certificate or a brochure: is there a batch number, and does it match the delivery note? Without that, it is a specification sheet with a nicer title.

Building a vendor approval pack

Most approval procedures ask for the same set. Ours, in one place:

  1. Safety data sheets for the products you will buy.
  2. Specifications for the same.
  3. Reference to the governing standard — ISO 18611-1 for AUS 40.
  4. Company details: registered name, address, tax identification, registry number.
  5. General terms of sale and the terms for returnable packaging.
  6. A specimen certificate of analysis, so you know what you will receive.

If something in your procedure is not on that list, tell us what it is and we will tell you honestly whether we have it.

Questions we get asked

Where can I download the SDS for caustic soda 50%?

Directly from our shop — the safety data sheets for both the 50% and the 30% sodium hydroxide solution are linked on this page, alongside the specifications and the general terms for returnable packaging.

Is an MSDS the same as an SDS?

In practice people use the terms interchangeably, and searches for "marine urea msds" are looking for the safety data sheet. Under the EU regime the correct term is safety data sheet, in the format set by REACH.

What is the difference between a safety data sheet, a specification and a certificate of analysis?

A safety data sheet covers hazards, handling, protective equipment and emergency response. A specification states what the product should be. A certificate of analysis states what one specific batch measured. For vendor approval you usually need the first two; for compliance evidence on a Tier III vessel you need the third as well.

What documents travel with a delivery?

The delivery note, the transport document for dangerous goods where the product requires it, and the certificate of analysis for the batch. The safety data sheet and specification you can have before you order.

Sources

  • onlinechem.pl product card for sodium hydroxide solution — CAS 1310-73-2, EC 215-185-5, UN1824, ADR class 8, H290 and H314, GHS05, PZH hygiene certificate, attached safety data sheets and specifications for 50% and 30%.
  • Safety data sheets for NaOH 50% — storage above 15 °C.
  • Westlake Vinnolit, ChemPoint, TCI / Novi — crystallisation of a 50% solution around 10–13 °C.
  • ISO 18611-1:2014 — quality requirements for AUS 40. ISO 22241 — the corresponding standard for AUS 32.

Need the product, not just the answer?

From one IBC to a road tanker, delivered to your vessel in Polish ports, with the certificate of analysis for your batch.

  • Urea solution 40% (AUS 40)
  • Caustic soda 50% (NaOH)

Related guides

Call us Request delivery slot